When replacing engine parts, it is very important to follow a series of steps to avoid future problems.
In this news, we are going to give you tips for the assembly of the cylinder head gaskets.

Previous steps to follow
If you are going to carry out the assembly, it is important that you know what you have to take into account during the process:
- The first and basic thing is to let the engine cool down to room temperature, to avoid deformation of the gasket with the heat.
- Loosen the cylinder head bolts with a suitable screwdriver, and be careful not to deform the notches.
- Thoroughly clean the cylinder head where the cylinder head gasket is to be fitted, so that it is free of any dirt particles. The screw holes should also be cleaned.
Verifications
Once all the above-mentioned is done, the cylinder head is clean and clear to place the gasket, but first it is important that we check:
- The flatness of the cylinder head. We will use a flatness meter, and if it has deformation, it should not be greater than 0.05 mm. If it exceeds this value, the cylinder head and the block must be ground.
- If the block is to be ground, we will measure the height of the piston with respect to the plane of the block to determine the thickness of the gasket we will need.
- If it is not necessary to grind any of the engine parts, we will use a gasket with the same thickness as the one previously used, making sure that the notches match in quantity and arrangement.
Under no circumstances should we mount the same cylinder head gasket a second time, even if we have changed the cylinder head!
Assembly of the part
At this point, we have everything ready to proceed with the assembly:
- We place the gasket on the cylinder head, making sure to match the oil and coolant tube holes.
- We put the screws in their respective spaces in the gasket. To avoid damage due to friction, it is advisable to lubricate the tip and thread of the screws lightly with grease and remove any excess.
It is advisable to always change the cylinder head bolts, as they can suffer from elongation.
Oryx spare parts
We hope you find these tips for the assembly of the cylinder head gaskets useful.
At Oryx Parts, we stock head gaskets suitable for both passenger cars and commercial vehicles.
We have a wide range of cylinder head gaskets of recognized brands such as Elring. We also have in stock cylinder head gaskets applicable in industrial engines such as Yanmar, Perkins, Cummins, John Deere, Kubota, Deutz… among others.
If you need more information, contact us, and we will help you with whatever you need.